🚧 Add feature requests

README.md

@@ -35,6 +35,13 @@ a virtual node whose I/O behavior is driven by scripted scenarios.
   with `DI0.1`-style addresses, toggle/force/pulse/ramp actions,
   watchdog/statistics/diagnostics views with fault injection, and
   multi-client consistency for collaborative FAT benches.
+- **Runtime device configuration** *(requested, planned — spec §11)*:
+  WBM/DIP-switch parity — module "plug/unplug" at runtime with
+  process-image rebuild (SAVE CONFIG / KBUS `0x102B` semantics),
+  address-selection DIP-switch emulation (host ID 1–254, 0 = stored
+  config, 255 = DHCP), WBM-equivalent pages (Port/Ethernet, Modbus
+  settings, Modbus Mapping, I/O Config), and device-state persistence
+  with factory reset.
 - **Long-duration (continuous) simulation** *(requested, planned — see
   `docs/spec/software-spec.md` §8)*: endurance/soak testing over days or
   weeks of simulated time. Designated inputs are driven from streaming
@@ -176,13 +183,27 @@ requirement ID for each item in parentheses.
 
 ### Phase 3 — Long-duration (continuous) simulation (spec §8)
 The soak-testing feature requested 2026-10-03 — specified in §8,
-not yet implemented:
+not yet implemented. Datasets are **optional**: signal logic
+(plugins, scheduled steps, degradation) runs in parallel with CSV
+streaming, or entirely without it.
 
 - [ ] `scenario/datasets.py` — streaming CSV playback for designated
-      inputs: header-driven time column, `interpolation: linear|hold`,
-      `repeat` with seamless seams, `time_factor` acceleration,
-      `until` limits, bounded memory, ERROR verdict with file/line on
-      malformed data (FR-8.2.1–8.2.11).
+      inputs (OPTIONAL driver): header-driven time column,
+      `interpolation: linear|hold`, `repeat` with seamless seams,
+      `time_factor` acceleration, `until` limits, bounded memory, ERROR
+      verdict with file/line on malformed data (FR-8.2.1–8.2.11).
+- [ ] Parallel logic pipeline — fixed per-tick order: datasets → edge
+      detection → plant plugins → degradation → invariants/rate
+      limits → scheduled steps → snapshots; plugins may read
+      dataset-driven and logic-driven aliases in the same tick
+      (FR-8.2.12).
+- [ ] Logic-only continuous runs — no `datasets:` needed: demand
+      profiles generated inside plugins, top-level `until:` bounds the
+      run; degradation/invariants/rate limits/snapshots apply
+      identically (FR-8.2.13).
+- [ ] Continuous-mode run-end + validation rules: run ends when all
+      drivers exhausted; scenario with no datasets, no scheduled steps
+      and no `until:` rejected (FR-8.2.1).
 - [ ] `scenario/degradation.py` — wear counters (runtime hours, start
       cycles, load-hours) and degradation models (`linear`,
       `exponential`, `staircase`, plugin shapes) computing plant
@@ -206,7 +227,8 @@ not yet implemented:
 - [ ] Acceptance tests per spec §8.8 (streaming 100k-row CSV,
       interpolation checks, repeat determinism, time_factor math,
       alias-ownership validation, degradation/recovery round-trip,
-      episode recording, full 28-day soak).
+      episode recording, full 28-day soak, logic-only run, mixed
+      dataset+logic tick-order run).
 
 ### Phase 4 — Reporting (spec §11)
 
@@ -229,6 +251,18 @@ not yet implemented:
       view (FR-10.2.6), multi-client consistency (FR-10.2.7), optional
       read-only/access control (FR-10.2.8), alias-ownership protection
       during scenario runs (FR-10.2.9).
+- [ ] **Runtime device configuration (§11)**: module hot-configuration
+      (plug/unplug at slot positions) with process-image rebuild per
+      KBUS/SAVE-CONFIG semantics and updated `0x1022–0x1025` /
+      `0x2030+` registers (FR-11.2.1–11.2.2); alias revalidation after
+      rebuilds with position-stable module addressing (FR-11.2.3);
+      rejection during running scenarios (FR-11.2.4);
+      address-selection DIP-switch emulation with the manual's exact
+      coding (1–254 host ID, 0 = stored config, 255 = DHCP,
+      restart-to-apply) (FR-11.3.1–11.3.4); WBM-equivalent pages —
+      Port/Ethernet, Modbus settings, Modbus Mapping, I/O Config with
+      SAVE CONFIG (FR-11.4.1–11.4.4); device-state persistence and
+      factory reset via `0x2043` (FR-11.5.1–11.5.2).
 
 ### Phase 6 — CI integration (spec §11)