R:最新異常検出時刻 (年) R:Latest error time (year) R:最新異常検出時刻 (月) R:Latest error time (month) R:最新異常検出時刻 (日) R:Latest error time (day) R:最新異常検出時刻 (時) R:Latest error time (hour) R:最新異常検出時刻 (分) R:Latest error time (minute) R:最新異常検出時刻 (秒) R:Latest error time (second) R:最新異常検出時刻 (曜日) R:Latest error time (day of the week) R:エラーコード R:Error Code R:最新エラーコード R:Latest error code 最新異常検出時刻 Latest error time R:シリアル通信エラーコード R:Serial communication error code R:シリアル通信エラー詳細 R:Serial communication error details R:シリアル通信通信設定 R:Serial communication setting R:シリアル通信動作モード表示 R:Serial communication operational mode 予約 Reserve R:送信データ残り点数 R:Remaining points of send data R:受信点数モニタ R:Receive data points monitor 予約 Reserve R:受信データ受信サム R:Receive sum (received data) R:計算結果受信サム R:Receive sum (received result) R:送信サム R:Send sum 予約 Reserve 予約 Reserve RW:タイムアウト時間 RW:Timeout time RW:8bit処理モード RW:8-bit processing mode RW:ヘッダ RW:Header RW:ターミネータ RW:Terminator 予約 Reserve R:送信待機フラグ R:Data transfer delayed RW:送信要求フラグ RW:Data transfer flag RW:受信完了フラグ RW:Receive completion flag R:キャリア検出フラグ R:Carrier detection flag R:DSR検出 DR（DSR） R:Data set ready flag R:タイムアウト判定フラグ R:Time-out check flag 予約 Reserve 予約 Reserve RW :高速比較テーブルエラーコード RW :High-speed comparison table error code 予約 Reserve RW :高速カウンタ現在値 RW :High-speed counter current value RW :高速カウンタ最大値 RW :High-speed counter maximum value RW :高速カウンタ最小値 RW :High-speed counter minimum value RW :高速カウンタパルス密度 RW :High-speed counter pulse density RW :高速カウンタ回転速度 RW :High-speed counter rotation speed RW :高速カウンタプリセット制御モード RW :High-speed counter preset control mode 予約 Reserve RW :高速カウンタプリセット値 RW :High-speed counter preset value RW :高速カウンタリング長 RW :High-speed counter ring length RW :高速カウンタ測定単位時間 RW :High-speed counter measurement-unit time RW :高速カウンタ1回転あたりのパルス数 RW :High-speed counter number of pulses per rotation 予約 Reserve RW :PWMパルス出力数 RW :PWM pulse output number RW :PWMパルス幅 RW :PWM pulse width RW :PWM周期 RW :PWM period R :PWMパルス出力数現在値 R :PWM number of output pulses current value monitor 予約 Reserve RW :パルス幅測定立上りリングカウンタ RW :Pulse width measurement rising ring counter value RW :パルス幅測定立下りリングカウンタ RW :Pulse width measurement falling ring counter value RW :パルス幅測定パルス幅最新値 RW :Pulse width measurement latest value RW :パルス幅測定パルス幅最大値 RW :Pulse width measurement maximum value RW :パルス幅測定パルス幅最小値 RW :Pulse width measurement minimum value RW :パルス幅測定周期最新値 RW :Pulse width measurement period latest value RW :パルス幅測定周期最大値 RW :Pulse width measurement period maximum value RW :パルス幅測定周期最小値 RW :Pulse width measurement period minimum value 予約 Reserve 高速カウンタ High-speed counter 高速比較テーブル（高速比較命令） High-speed comparison table (high-speed compare instruction) R :多点出力高速比較中テーブル番号 R :Multi-point output high-speed comparison table comparison number RW :多点出力高速比較テーブルエラーコード RW :Multi-point output high-speed comparison table error code パルス幅測定 Pulse width measurement PWM PWM RW :位置決め現在アドレス(ユーザ単位) RW :Positioning current address (user unit) RW :位置決め現在アドレス(パルス単位) RW :Positioning current address (pulse unit) R :位置決め現在速度(ユーザ単位) R :Positioning current speed (user unit) R :位置決め実行中テーブル番号 R :Positioning execution table number 予約 Reserve R :位置決め合成速度(ユーザ単位) R :Positioning composite speed (user unit) RW :位置決めエラーコード RW :Positioning error code RW :位置決めエラー発生テーブル番号 RW :Positioning error table number 予約 Reserve RW :位置決め最高速度 RW :Positioning maximum speed RW :位置決めバイアス速度 RW :Positioning bias speed RW :位置決め加速時間 RW :Positioning acceleration time RW :位置決め減速時間 RW :Positioning deceleration time 予約 Reserve RW :位置決め原点復帰速度 RW :Positioning zero-return speed RW :位置決めクリープ速度 RW :Positioning creep speed RW :位置決め原点アドレス RW :Positioning zero-point address RW :位置決め原点復帰零点信号数 RW :Positioning number of zero-point signal for zero return RW :位置決め原点復帰ドウェルタイム RW :Positioning zero-return dwell time 予約 Reserve R :高速比較テーブル動作中 R :High-speed comparison table operation 予約 Reserve RW :高速比較テーブルエラー発生 RW :High-speed comparison table error 予約 Reserve R :高速カウンタ動作中 R :High-speed counter operation R :高速カウンタパルス密度/回転速度測定中 R :High-speed counter pulse density/Rotation speed measurement RW :高速カウンタオーバーフロー発生 RW :High-speed counter overflow RW :高速カウンタアンダーフロー発生 RW :High-speed counter underflow R :高速カウンタカウント方向モニタ R :High-speed counter count direction monitor RW :高速カウンタカウント方向切替え RW :High-speed counter count switching RW :高速カウンタプリセット入力論理 RW :High-speed counter preset input logic RW :高速カウンタプリセット入力比較 RW :High-speed counter preset input comparison RW :高速カウンタイネーブル入力論理 RW :High-speed counter enable input logic RW :高速カウンタリング長設定 RW :High-speed counter ring length R :PWMパルス出力中モニタ R :PWM pulse output monitor RW :PWM出力正常完了フラグ RW :PWM output normal completed flag RW :PWM出力異常完了フラグ RW :PWM output error completed flag R :パルス幅測定動作中 R :Pulse width measurement operation R :周期測定完了 R :Period measurement complete R :パルス幅測定完了 R :Pulse width measurement complete RW :パルス幅測定測定モード RW :Pulse width measurement mode R :位置決め命令駆動中 R :Positioning instruction activation R :位置決めパルス出力中モニタ R :Positioning pulse output monitor RW :位置決めエラー発生 RW :Positioning error occurrence RW :位置決めテーブル移行指令 RW :Positioning table shift command RW :位置決め残距離運転有効 RW :Positioning remaining distance operation enabled RW :位置決め残距離運転指令 RW :Positioning remaining distance operation command RW :位置決めパルス停止指令 RW :Positioning pulse output stop command RW :位置決めパルス減速停止指令 RW :Positioning pulse decelerate and stop command RW :位置決め正転極限 RW :Positioning forward limit RW :位置決め逆転極限 RW :Positioning reverse limit RW :位置決め回転方向指定 RW :Positioning rotation direction setting RW :位置決め原点復帰方向指定 RW :Positioning zero return direction RW :位置決めクリア信号出力有効 RW :Positioning clear signal output function enable RW :位置決め零点信号カウント開始時期 RW :Positioning zero-point signal count start RW :位置決めテーブルデータ初期化無効 RW :Positioning table data initialize disable R :診断情報1 占有局数 R :Diagnostics1 number of occupied stations R :診断情報1 グループNo. R :Diagnostics1 group No. R :診断情報1 IPアドレス R :Diagnostics1 IP address R :診断情報1 タイムアウト累積回数 R :Diagnostics1 accumulated number of timeout R :診断情報1 解列検出累積回数 R :Diagnostics1 accumulated number of disconnected detection R :診断情報2 メーカコード R :Diagnostics2 manufacturer code R :診断情報2 形名コード R :Diagnostics2 model code R :診断情報2 機器バージョン R :Diagnostics2 device version R :診断情報2 ユニット情報 R :Diagnostics2 module information R :診断情報2 エラーコード R :Diagnostics2 error code R :診断情報2 ユニット詳細情報 R :Diagnostics2 detailed module information R :最大リンクスキャンタイム R :Max link scan time R :最小リンクスキャンタイム R :Min link scan time R :現在リンクスキャンタイム R :Current link scan time R :コネクションNo. プロトコル実行状態 R :Connection No. protocol execution status 予約 Reserve R :コネクションNo. 受信照合結果 受信パケット番号 R :Connection No. received data verification result receive packet No. R :コネクションNo. プロトコル実行回数 R :Connection No. protocol execution count RW :コネクションNo. プロトコルキャンセル指定 RW :Connection No. protocol cancellation specification RW :Auto restoration request RW :Initialization setting at the automatic restoration RW :Restoration target folder RW :Restoration for the special relay and special register RW :Setting of operation after restoration RW :Restoration target date folder setting (month and day) RW :Restoration target date folder setting (year) RW :Clock data (Year) RW :Clock data (Month) RW :Clock data (Day) RW :Clock data (Hour) RW :Clock data (Minute) RW :Clock data (Second) RW :Clock data (Day Week) R :Detailed information information category R :Detailed information R :Annunciator (F) Detection No. R :Annunciator (F) Detection Number R :Annunciator (F) Detection No. table R :SD memory card usage status R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting RTD type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Resistance offset value RW :Resistance gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting RTD type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Resistance offset value RW :Resistance gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting RTD type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Resistance offset value RW :Resistance gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting RTD type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Resistance offset value RW :Resistance gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting thermocouple type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Thermal EMF offset value RW :Thermal EMF gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting thermocouple type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Thermal EMF offset value RW :Thermal EMF gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting thermocouple type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Thermal EMF offset value RW :Thermal EMF gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Measured temperature value Reserve RW :Average processing setting RW :Time average/count average/moving average RW :Setting thermocouple type R :Maximum value R :Minimum value Reserve RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm detection cycle setting RW :Conversion setting for disconnection detection RW :Conversion setting value for disconnection detection Reserve RW :Offset temperature setting value RW :Gain temperature setting value RW :Offset/gain code RW :Thermal EMF offset value RW :Thermal EMF gain value RW :Input offset value RW :Input gain value R :Conversion latest alarm code R :Conversion latest error code R :Data logging setting Latest storage file number R :Data logging setting Oldest storage file number R :Data logging setting Internal buffer free space R :Data logging setting Number of processing overflow occurrences R :Data logging setting Data logging error cause R :Module status information R :Module error information R :scan time (ms) R :scan time (µs) Initial scan time Current scan time Minimum scan time Maximum scan time RW :CPU module auto exchange function enable/disable flag R :Extended file register (ER) access flag R :Firmware update prohibit state RW :Clear/keep of latch label during PC write R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag R :Conversion completed flag RW :Conversion enable/disable setting Reserve R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper limit) R :Warning output flag (rate alarm lower limit) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection detection automatic clear enable/disable setting Reserve R :Offset/gain setting flag RW :Read offset/gain RW :Write offset/gain RW :Initialize offset/gain Reserve RW :Conversion alarm clear request R :Conversion alarm flag R :Conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable RW :Scaling enable/disable setting R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting RW :D/A alarm clear request R :D/A alarm flag R :D/A error flag R :Data logging setting Data logging preparation R :Data logging setting Data logging start R :Data logging setting Data logging data collection in progress R :Data logging setting Data logging completion R :Data logging setting Data logging triggering R :Data logging setting Post data logging triggering R :Data logging setting Data logging error R :Data logging setting Data logging data saving into memory card in progress R :Data logging setting Logging data storage file switching in progress RW :Data logging setting No.1 Data logging register/clear flag RW :Data logging setting No.2 Data logging register/clear flag RW :Data logging setting No.3 Data logging register/clear flag RW :Data logging setting No.4 Data logging register/clear flag R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code R :Digital output value R :Digital operation value R :Analog input value monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting RW :Input range setting R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value RW :Rate alarm upper limit value RW :Rate alarm lower limit value RW :Rate alarm warning detection period setting Reserve RW :Convergence detection upper limit value RW :Convergence detection lower limit value RW :Detection time setting for convergence detection R :Deviation detection CH1 R :Deviation detection CH2 RW :Deviation value for deviation detection between channel RW :CH setting 1 for deviation detection between channel RW :CH setting 2 for deviation detection between channel Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :A/D conversion latest alarm code R :A/D conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code RW :Digital value R :Digital operation value R :Analog output value monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Output range setting Reserve RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value Reserve RW :Offset setting value RW :Gain setting value RW :Offset/gain writing enable code Reserve R :D/A conversion latest alarm code R :D/A conversion latest error code R :Module Information 1 R :Module Information 2 R :Module Information 3 R :Module Information 4 FX5-4AD-ADP-1 FX5-4AD-TC-ADP-1 FX5-4AD-PT-ADP-1 FX5-4DA-ADP-1 FX5-4A-ADP-1(A/D) FX5-4A-ADP-1(D/A) FX5-4AD-ADP-2 FX5-4AD-TC-ADP-2 FX5-4AD-PT-ADP-2 FX5-4DA-ADP-2 FX5-4A-ADP-2(A/D) FX5-4A-ADP-2(D/A) FX5-4AD-ADP-3 FX5-4AD-TC-ADP-3 FX5-4AD-PT-ADP-3 FX5-4DA-ADP-3 FX5-4A-ADP-3(A/D) FX5-4A-ADP-3(D/A) FX5-4AD-ADP-4 FX5-4AD-TC-ADP-4 FX5-4AD-PT-ADP-4 FX5-4DA-ADP-4 FX5-4A-ADP-4(A/D) FX5-4A-ADP-4(D/A) R :Digital output value R :Digital operation value R :Analog input voltage monitor RW :Average processing specify RW :Time Average/Count Average/Moving Average setting Reserve R :Maximum value R :Minimum value RW :Scaling upper limit value RW :Scaling lower limit value RW :Conversion value shift amount RW :Process alarm upper upper limit value RW :Process alarm upper lower limit value RW :Process alarm lower upper limit value RW :Process alarm lower lower limit value Reserve R :Conversion latest alarm code R :Conversion latest error code RW :Digital input value R :Digital operation value R :Analog output voltage monitor RW :HOLD/CLEAR function setting RW :HOLD setting value RW :Scaling upper limit value RW :Scaling lower limit value RW :Input value shift amount RW :Warning output upper limit value RW :Warning output lower limit value R :Conversion latest alarm code R :Conversion latest error code Analog input Analog output R :Data logging setting No.1 Data logging register/clear error code R :Data logging setting No.2 Data logging register/clear error code R :Data logging setting No.3 Data logging register/clear error code R :Data logging setting No.4 Data logging register/clear error code RW :Watchdog Timer R :CPU Version R :Battery Voltage RW :Low Battery Voltage R :Power Failure Count RW :Power failure detection period R :Current Scan Time (100 μs) R :Min. Scan Time (100 μs) R :Max. Scan Time (100 μs) RW :Clock Data (Second) RW :Clock Data (Minute) RW :Clock Data (Hour) RW :Clock Data (Day) RW :Clock Data (Month) RW :Clock Data (Year) RW :Clock Data (Day of the Week) RW :Constant Scan Duration RW :STL: ON state number 1 RW :STL: ON state number 2 RW :STL: ON state number 3 RW :STL: ON state number 4 RW :STL: ON state number 5 RW :STL: ON state number 6 RW :STL: ON state number 7 RW :STL: ON state number 8 RW :Lowest Active Annunciator R :Serial Communication Error Code (CH1) R :Operation Error Code RW :High-Speed Ring Counter R :PLSY instruction total output (axis 1 and axis 2) R :PLSY instruction number of pulses output (axis 1) R :PLSY instruction number of pulses output (axis 2) R :Inverter Communication Error Code (CH1) R :IVBWR Instruction Error Parameter Number (CH1) R :Inverter Communication Error Code (CH2) R :IVBWR Instruction Error Parameter Number (CH2) R :Module error status(Slot 0 to 18) RW :Station number RW :Total number of slave stations R :Refresh range R :Current link scan time R :Maximum link scan time R :Number of communication error at master station R :Number of communication error at slave station No.1 R :Number of communication error at slave station No.2 R :Number of communication error at slave station No.3 R :Number of communication error at slave station No.4 R :Number of communication error at slave station No.5 R :Number of communication error at slave station No.6 R :Number of communication error at slave station No.7 R :Code of communication error at master station R :Code of communication error at slave station No.1 R :Code of communication error at slave station No.2 R :Code of communication error at slave station No.3 R :Code of communication error at slave station No.4 R :Code of communication error at slave station No.5 R :Code of communication error at slave station No.6 R :Code of communication error at slave station No.7 R :RND Instruction Random Number Generation R :DUTY Instruction Scan Count Timing Clock Output 1 R :DUTY Instruction Scan Count Timing Clock Output 2 R :DUTY Instruction Scan Count Timing Clock Output 3 R :DUTY Instruction Scan Count Timing Clock Output 4 R :DUTY Instruction Scan Count Timing Clock Output 5 R :Positioning Current Address (Pulse Unit) (Axis 1) R :Positioning Current Address (Pulse Unit) (Axis 2) R :Positioning Current Address (Pulse Unit) (Axis 3) R :Positioning Current Address (Pulse Unit) (Axis 4) RW :Delay time R :1 ms Ring Counter R :RS2 Amount of Remaining Data/MODBUS Communication Error Code (CH1) R :RS2 Receive Data Points/MODBUS Communication Error Details (CH1) R :RS2 Communication Parameter Display/MODBUS Communication Format Display (CH1) R :MODBUS Communication Retry Times (CH1) R :RS2 Received Data Receive Sum (CH1) R :RS2 Calculated Result Receive Sum (CH1) R :RS2 Send Sum (CH1) R :Operation Mode (CH1) R :RS2 Amount of Remaining Data/MODBUS Communication Error Code (CH2) R :RS2 Receive Data Points/MODBUS Communication Error Details (CH2) R :RS2 Communication Parameter Display/MODBUS Communication Format Display (CH2) R :MODBUS Communication Retry Times (CH2) R :RS2 Received Data Receive Sum (CH2) R :RS2 Calculated Result Receive Sum (CH2) R :RS2 Send Sum (CH2) R :Serial Communication Error Code (CH2) R :Operation Mode (CH2) RW :IP address setting RW :Subnet mask setting RW :Default gateway IP address setting R :IP address storage area write error code R :IP address storage area clear error code R :Error code details Module Information RW :All module reset command permission code R :Cumulative operating time RW :Operation mode setting RW :CPU module automatic replacement function Restore target data setting RW :CPU module auto exchange function setting R :IVBWR instruction error parameter number (CH1) R :IVBWR instruction error parameter number (CH2) R :IVBWR instruction error parameter number (CH3) R :IVBWR instruction error parameter number (CH4) R :Response wait time (CH1) R :Response wait time (CH2) R :Response wait time (CH3) R :Response wait time (CH4) R :Station number setting (CH1) R :Message frame and form (CH1) R :Timeout time (CH1) R :Message waiting time (CH1) R :Station number setting (CH2) R :Message frame and form (CH2) R :Timeout time (CH2) R :Message waiting time (CH2) R :Station number setting (CH3) R :Message frame and form (CH3) R :Timeout time (CH3) R :Message waiting time (CH3) R :Station number setting (CH4) R :Message frame and form (CH4) R :Timeout time (CH4) R :Message waiting time (CH4) R :Current retry value (CH1) R :Current retry value (CH2) R :Current retry value (CH3) R :Current retry value (CH4) R :Slave node address (CH1) R :Slave response timeout (CH1) R :Turn around delay (CH1) R :Message to message delay (CH1) R :Number of retries (CH1) R :Slave node address (CH2) R :Slave response timeout (CH2) R :Turn around delay (CH2) R :Message to message delay (CH2) R :Number of retries (CH2) R :Slave node address (CH3) R :Slave response timeout (CH3) R :Turn around delay (CH3) R :Message to message delay (CH3) R :Number of retries (CH3) R :Slave node address (CH4) R :Slave response timeout (CH4) R :Turn around delay (CH4) R :Message to message delay (CH4) R :Number of retries (CH4) R :Station number R :Total number of slave stations R :Current link scan time R :Maximum link scan time R :Number of communication error at master station R :Number of communication error at slave station No.1 R :Number of communication error at slave station No.2 R :Number of communication error at slave station No.3 R :Number of communication error at slave station No.4 R :Number of communication error at slave station No.5 R :Number of communication error at slave station No.6 R :Number of communication error at slave station No.7 R :Code of communication error at master station R :Code of communication error at slave station No.1 R :Code of communication error at slave station No.2 R :Code of communication error at slave station No.3 R :Code of communication error at slave station No.4 R :Code of communication error at slave station No.5 R :Code of communication error at slave station No.6 R :Code of communication error at slave station No.7 RW :Station number setting RW :Total slave station number setting R :Refresh range setting R :Retry count setting R :Communication time-out setting R :Master station/slave station setting R :Link mode setting R :Error determination time setting R :Predefined protocol ready R :Predefined protocol setting data error information: Protocol No. R :Predefined protocol setting data error information: Setting type R :Predefined protocol setting data error information: Packet No. R :Predefined protocol setting data error information: Element No. R :Number of registered predefined protocols R :Predefined protocol: Protocol registration (1 to 16) R :Predefined protocol: Protocol registration (17 to 32) R :Predefined protocol: Protocol registration (33 to 48) R :Predefined protocol: Protocol registration (49 to 64) R :Protocol execution status (CH1) R :Protocol execution count (CH1) RW :Protocol cancel specification (CH1) R :Protocol execution status (CH2) R :Protocol execution count (CH2) RW :Protocol cancel specification (CH2) R :Protocol execution status (CH3) R :Protocol execution count (CH3) RW :Protocol cancel specification (CH3) R :Protocol execution status (CH4) R :Protocol execution count (CH4) RW :Protocol cancel specification (CH4) RW :Send/receive data monitoring function setting (CH1) W :Send/receive data monitoring function option setting (CH1) W :Monitoring data device specification (CH1) W :Monitoring data start device No. specification (CH1) W :Monitoring data size specification (CH1) RW :Send/receive data monitoring function setting (CH2) W :Send/receive data monitoring function option setting (CH2) W :Monitoring data device specification (CH2) W :Monitoring data start device No. specification (CH2) W :Monitoring data size specification (CH2) RW :Send/receive data monitoring function setting (CH3) W :Send/receive data monitoring function option setting (CH3) W :Monitoring data device specification (CH3) W :Monitoring data start device No. specification (CH3) W :Monitoring data size specification (CH3) RW :Send/receive data monitoring function setting (CH4) W :Send/receive data monitoring function option setting (CH4) W :Monitoring data device specification (CH4) W :Monitoring data start device No. specification (CH4) W :Monitoring data size specification (CH4) Serial communication information Serial communication status Serial communication setting information MC protocol MODBUS serial communication Inverter communication N:N network Parallel link Predefined protocol support Latest Error R :The number of AC/DC DOWN detections R :I/O Module Verify Error Module No. Annunciator (F) Detailed information R :Switch Status R :LED Status R :CPU Status Clock data R :Time zone setting value R :Loaded Max I/O R :X Device Size R :Y Device Size R :M Device Size R :B Device Size R :SB Device Size R :F Device Size R :L Device Size R :D Device Size R :W Device Size R :SW Device Size R :T Device Size R :ST Device Size R :C Device Size R :LC Device Size R :Z Device Size R :LZ Device Size R :R Device Size R :Online program change (SFC block) target block number R :One second counter RW :2n second clock setting RW :2nms second clock setting R :Scan counter R :Execution program number Scan Time END processing time Constant scan waiting time Scan program execution time R :Memory Card Installation Memory card use condition (drive2) R :SD memory card capacity R :SD memory card free space capacity R :Index for the number of data memory write operations R :Current interrupt priority R :Interrupt disabling for each priority setting value RW :DEVST instruction execution count setting R :Backup error cause RW :Restoration target data setting CPU module restoration function setting CPU module restoration target date stamp folder setting RW :Restoration target number folder setting R :Restoration error cause Data logging setting R :Number of uncompleted folders/files of CPU module data backup/restoration R :Progression status of CPU module data backup/restoration R :Mask pattern I R :Memory dump error cause R :Real-time monitor internal buffer free space R :Cyclic transmission status of each station (station No.1 to 16) R :Data link status of each station (station No.1 to 16) FX dedicated High-speed input and output Positioning CPU module built-in analog Analog Adapter FX compatible area Serial communication Data logging function Latch area RW :CC-Link IE Field Network Basic communication interval setting R :Total number of connected R :Reserved station setting status R :Reserved station setting status of each station (station No.1 to 16) Link scan time RW :Diagnostics request RW :Information of diagnostics request R :Valid/invalid flag of diagnostics Diagnostics1 Diagnostics2 R :Time setting function execution time (year) R :Time setting function execution time (month) R :Time setting function execution time (day) R :Time setting function execution time (hour) R :Time setting function execution time (minute) R :Time setting function execution time (second) R :Time setting function execution time (day of the week) R :Own node IP address R :Subnet mask R :Default gateway IP address R :Own node MAC address R :Communication speed setting R :MELSOFT connection TCP port number R :MELSOFT direct connection port number R :Latest error code R :MELSOFT direct connection latest error code R :Same IP address detection flag R :MAC address already connected station R :MAC Address of the station connected later R :Remote password lock status connection No.1 to 8 R :MELSOFT transmission port (TCP) remote password lock status R :MELSOFT direct connection port remote password lock stasus R :Time setting function operation result Time setting function (SNTP client) execution R :Time setting function required response time RW :Time setting function execution time R :Countinuous unlock failure count connection No.1 to 8 R :MELSOFT transmission port (UDP) continuous unlock failure count R :MELSOFT transmission port (TCP) continuous unlock failure count R :FTP transmission port continuous unlock failure count R :MELSOFT direct connection port continuous unlock failure count R :Connection open completion status connection No.1 to 8 R :Connection open request status commection No.1 to 8 R :Socket communication receive status connection No.1 to 8 R :Initial processing completion status R :Predefined protocol ready R :Protocol number of predefined protocol setting data error information R :Setting type of predifined protocol setting data error information R :Packet number of predifined protocol setting data error information R :Element number of predifined protocol setting data error information R :Number of registerd predefined protocols R :Predefined protocol registration No.1 to 64 Protocol execution status RW :Communication start request for each setting No. requested RW :Interval communication stop request for each setting No. RW :Interval communication restart request for each setting No. R :Status flag for each setting No. R :Ready for each setting No. R :Simple PLC communication status for each setting No. R :Simple PLC communication error code for each setting No. R :Execution interval (current value) for each setting No. R :Abnormal response code for each setting No. R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale upper limit detection flag R :Over scale lower limit detection flag RW :Over scale detection enable/disable setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :Scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (process alarm upper limit) R :Warning output flag (process alarm lower limit) RW :Warning output setting (process alarm) Reserve R :Warning output flag (rate alarm upper) R :Warning output flag (rate alarm lower) RW :Warning output setting (rate alarm) R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting R :Convergence detection flag RW :Convergence detection enable/disable setting Reserve R :Deviation detection flag between channel RW :Deviation detection trigger between channel Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :A/D conversion alarm clear request R :A/D conversion alarm flag R :A/D conversion error flag RW :D/A conversion enable/disable setting RW :D/A output enable/disable setting Reserve RW :Scaling enable/disable setting Reserve R :Warning output upper limit value flag R :Warning output lower limit value flag RW :Warning output setting Reserve R :Disconnection detection flag RW :Disconnection detection enable/disable setting RW :Disconnection recovery detection enable/disable setting Reserve RW :Offset/gain reading RW :Offset/gain writing RW :Offset/gain initialization Reserve RW :D/A conversion alarm clear request R :D/A conversion alarm flag R :D/A conversion error flag RW :Temperature unit selection 1 RW :Temperature unit selection 2 RW :Temperature unit selection 3 RW :Temperature unit selection 4 FX5-4AD-ADP-1 FX5-4AD-TC-ADP-1 FX5-4AD-PT-ADP-1 FX5-4DA-ADP-1 FX5-4A-ADP-1(A/D) FX5-4A-ADP-1(D/A) FX5-4AD-ADP-2 FX5-4AD-TC-ADP-2 FX5-4AD-PT-ADP-2 FX5-4DA-ADP-2 FX5-4A-ADP-2(A/D) FX5-4A-ADP-2(D/A) FX5-4AD-ADP-3 FX5-4AD-TC-ADP-3 FX5-4AD-PT-ADP-3 FX5-4DA-ADP-3 FX5-4A-ADP-3(A/D) FX5-4A-ADP-3(D/A) FX5-4AD-ADP-4 FX5-4AD-TC-ADP-4 FX5-4AD-PT-ADP-4 FX5-4DA-ADP-4 FX5-4A-ADP-4(A/D) FX5-4A-ADP-4(D/A) R :A/D conversion completed flag RW :A/D conversion enable/disable setting R :Over scale detection flag Reserve RW :Over scaling over detection setting R :Maximum value/minimum value reset completed flag RW :Maximum value reset request RW :Minimum value reset request RW :A/D scaling enable/disable setting RW :Digital clipping enable/disable setting Reserve R :Warning output flag (Process alarm upper limit) R :Warning output flag (Process alarm lower limit) RW :Warning output setting (Process alarm) Reserve RW :A/D alarm clear request R :A/D alarm flag R :A/D error flag Analog input Analog output R :Always ON R :Always OFF R :After RUN 1 Scan ON R :After RUN 1 Scan OFF R :Error Detection R :Low Battery Detection R :Low Battery Detection (Status Holding) R :Momentary Power Failure R :Power Failure Detected R :10 ms Clock R :100 ms Clock R :1 s Clock R :1 min Clock R:RTC Clocking Stop and Preset R:RTC Time Read Display Stop R:RTC ±30-sec Compensation R :RTC Read Data Error R :Zero Flag R :Borrow Flag R :Carry Flag R :RTC Access Error RW :RAMP Instruction Operation Stop Mode RW :Non-Latch Memory All Clear RW :Latch Memory All Clear RW :Memory Hold Command at Stop RW :All Output Disable RW :Constant Scan Mode RW :STL: Transfer disable R :STL: Operation start in automatic operation R :STL: Start pulse RW :STL: Zero return complete RW :STL: Zero point condition RW :STL: All output reset disable for mode change R :STL: STL state ON RW :STL: Enable STL monitoring (SD8040 to SD8047) R :Annunciator ON RW :Enable Annunciator Monitoring RW :I0 Interrupt Disable RW :I1 Interrupt Disable RW :I2 Interrupt Disable RW :I3 Interrupt Disable RW :I4 Interrupt Disable RW :I5 Interrupt Disable RW :I28 Interrupt Disable RW :I29 Interrupt Disable RW :I30 Interrupt Disable RW :I16-I23 Interrupt Disable R :Serial Communication Error (CH1) R :Operation Error R :Operation Error Latch R :Parallel link ON R :BKCMP Instruction Block Comparison Signal RW :High-Speed Ring Counter Operaiton R :Computer link global ON (CH1) R :Inverter Communication (CH1) R :Inverter Communication Error (CH1) R :Inverter Communication Error Latch (CH1) R :IVBWR Instruction Error (CH1) R :Inverter Communication (CH2) R :Inverter Communication Error (CH2) R :Inverter Communication Error Latch (CH2) R :IVBWR Instruction Error (CH2) RW :ASCI/HEX/CRC Instruction 8-bit Operation Mode RW :SMOV Instruction Hexadecimal Operation Command RW :X000 Pulse Catch RW :X001 Pulse Catch RW :X002 Pulse Catch RW :X003 Pulse Catch RW :X004 Pulse Catch RW :X005 Pulse Catch RW :X006 Pulse Catch RW :X007 Pulse Catch R :Data communication error (Master station) R :Data communication error (Slave station No.1) R :Data communication error (Slave station No.2) R :Data communication error (Slave station No.3) R :Data communication error (Slave station No.4) R :Data communication error (Slave station No.5) R :Data communication error (Slave station No.6) R :Data communication error (Slave station No.7) R :Data communication in execution RW :LC0 Count Direction Setting RW :LC1 Count Direction Setting RW :LC2 Count Direction Setting RW :LC3 Count Direction Setting RW :LC4 Count Direction Setting RW :LC5 Count Direction Setting RW :LC6 Count Direction Setting RW :LC7 Count Direction Setting RW :LC8 Count Direction Setting RW :LC9 Count Direction Setting RW :LC10 Count Direction Setting RW :LC11 Count Direction Setting RW :LC12 Count Direction Setting RW :LC13 Count Direction Setting RW :LC14 Count Direction Setting RW :LC15 Count Direction Setting RW :LC16 Count Direction Setting RW :LC17 Count Direction Setting RW :LC18 Count Direction Setting RW :LC19 Count Direction Setting RW :LC20 Count Direction Setting RW :LC21 Count Direction Setting RW :LC22 Count Direction Setting RW :LC23 Count Direction Setting RW :LC24 Count Direction Setting RW :LC25 Count Direction Setting RW :LC26 Count Direction Setting RW :LC27 Count Direction Setting RW :LC28 Count Direction Setting RW :LC29 Count Direction Setting RW :LC30 Count Direction Setting RW :LC31 Count Direction Setting RW :LC32 Count Direction Setting RW :LC33 Count Direction Setting RW :LC34 Count Direction Setting R :LC46 counting direction monitoring R :LC47 counting direction monitoring R :LC48 counting direction monitoring R :LC49 counting direction monitoring R :LC50 counting direction monitoring R :LC51 counting direction monitoring R :LC52 counting direction monitoring R :LC53 counting direction monitoring R :LC54 counting direction monitoring R :LC55 counting direction monitoring R :MUL/DIV Instruction Zero Flag R :MUL/DIV Instruction Carry Flag R :RTC clock data loss error RW :RBFM(FNC278)/WBFM(FNC279) non-execution R :DUTY Instruction Output 1 R :DUTY Instruction Output 2 R :DUTY Instruction Output 3 R :DUTY Instruction Output 4 R :DUTY Instruction Output 5 R :Positioning Pulse Output Monitor (Axis 1) R :Positioning Instruction Activation (Axis 1) R :Positioning Pulse Output Monitor (Axis 2) R :Positioning Instruction Activation (Axis 2) R :Positioning Pulse Output Monitor (Axis 3) R :Positioning Instruction Activation (Axis 3) R :Positioning Pulse Output Monitor (Axis 4) R :Positioning Instruction Activation (Axis 4) RW :Delay time setting contact R :RS2 Instruction Send Wait/MODBUS Request in Process (CH1) R :MODBUS Communication Error (CH1) R :MODBUS Communication Error Latch (CH1) R :RS2 Instruction Carrier Detection/MODBUS Communication Mode (CH1) R :RS2 Instruction DSR Detection (CH1) R :MODBUS Communication Retry (CH1) R :RS2 Instruction Timeout Check/MODBUS Communication Timeout (CH1) R :SLMP status (CH1) R :RS2 Instruction Send Wait/MODBUS Request in Process (CH2) R :MODBUS Communication Error (CH2) R :MODBUS Communication Error Latch (CH2) R :RS2 Instruction Carrier Detection/MODBUS Communication Mode (CH2) R :RS2 Instruction DSR Detection (CH2) R :Computer link global ON (CH2) R :MODBUS Communication Retry (CH2) R :RS2 Instruction Timeout Check/MODBUS Communication Timeout (CH2) R :Serial Communication Error (CH2) R :SLMP status (CH2) RW :IP address storage area write request R :IP address storage area write completed R :IP address storage area write error RW :IP address storage area clear request R :IP address storage area clear completed R :IP address storage area clear error R :IP address change function enable flag RW :All module reset command RW :Event execution type program operation timing switch setting flag RW :File access adjustment setting RW :Intelligent module latest error clear request High-speed counter High-speed comparison table (high-speed compare instruction) R :Multi-point output high-speed comparison table operation RW :Multi-point output high-speed comparison table completion RW :Multi-point output high-speed comparison table error Pulse width measurement PWM R :Inverter communication (CH1) R :IVBWR instruction error (CH1) R :Inverter communication (CH2) R :IVBWR instruction error (CH2) R :Inverter communication (CH3) R :IVBWR instruction error (CH3) R :Inverter communication (CH4) R :IVBWR instruction error (CH4) R :Global ON (CH1) R :Global ON (CH2) R :Global ON (CH3) R :Global ON (CH4) R :Station No. setting SD latch enabled (CH1) R :Station No. setting SD latch enabled (CH2) R :Station No. setting SD latch enabled (CH3) R :Station No. setting SD latch enabled (CH4) R :MODBUS RTU communication (CH1) R :Retry (CH1) R :Timeout (CH1) R :MODBUS RTU communication (CH2) R :Retry (CH2) R :Timeout (CH2) R :MODBUS RTU communication (CH3) R :Retry (CH3) R :Timeout (CH3) R :MODBUS RTU communication (CH4) R :Retry (CH4) R :Timeout (CH4) R :Host station No. setting SD latch enabled (CH1) R :Host station No. setting SD latch enabled (CH2) R :Host station No. setting SD latch enabled (CH3) R :Host station No. setting SD latch enabled (CH4) R :Data communication error (Master station) R :Data communication error (Slave station No.1) R :Data communication error (Slave station No.2) R :Data communication error (Slave station No.3) R :Data communication error (Slave station No.4) R :Data communication error (Slave station No.5) R :Data communication error (Slave station No.6) R :Data communication error (Slave station No.7) R :Data communication in execution R :Station No. setting SD latch enabled R :Slave station total number setting SD latch enabled R :Parallel link operation R :Serial communication error Reserve R :SLMP status Reserve Serial communication error Serial communication flag MC protocol MODBUS serial communication Inverter communication N:N network Parallel link R :Latest self diagnostics error (including annunciator ON) R :Latest self diagnostics error (not including annunciator On) RW :Error reset R :Battery low latch R :Battery low R :AC/DC DOWN R :Instruction execution fault R :I/O module verify error RW :Annunciator R :Detailed information 1: Flag in use RW :Detailed information 2: Flag in use R :STOP contact R :PAUSE contact RW :Clock data set request R :Clock data set error RW :Clock data read request R:Daylight saving time flag R :SFC program presence RW :SFC program START/STOP RW :SFC program START status RW :All-blocks continuous transition status R :Continuous transition disable flag RW :Output mode at block stop RW :Output mode at end step execution RW :Clear processing mode at arrival at end step R :Online program change (SFC block) status flag R :Always ON R :Always OFF R :After RUN, ON for one scan only R :After RUN, OFF for one scan only R :b10msClock R :b100msClock R :b200msClock R :b1sClock R :b2sClock R :b2n_sClock R :b2n_msClock R :Timing clock output 1 R :Timing clock output 2 R :Timing clock output 3 R :Timing clock output 4 R :Timing clock output 5 RW :Scan time clear request R :Memory card usable R :Memory card protect R :Memory card insertion RW :Memory card interchange protect RW :Memory card disable request R :Memory card disable status R :Data memory write error detection R :Data memory writing R :Data memory write count error detection flag RW :Dedicated instruction skip flag R :Carry flag RW :Number of Output Characters switching RW :Sort order R :Block comparison RW :Number of conversion digits switching RW :DT/TM instruction improper data detection R :File being accessed Firmware update function R :Data backup error check flag R :Data restoration error check flag R :SD memory card setting file in use flag R :Data memory setting file in use flag Data logging setting RW :Data logging setting Data logging suspend/resume flag R :Data backup status flag RW :Data backup execution request R :Data restoration status flag RW :Data restoration execution request R :FTP client connection status R :Memory dump in progress R :Memory dump completed R :Cyclic transmission status R :Data link status High-speed input and output R :FX3 compatible transition operation mode setting status Positioning CPU module built-in analog Analog Adapter R :Instruction execution complete R :Instruction execution error FX compatible area Serial communication (SM) Data logging function Data backup/restoration function Latch area Extended file register function RW :CC-Link IE Field Network Basic communication interval setting enable/disable flag (Setting value) R :CC-Link IE Field Network Basic communication interval setting enable/disable flag (Current value) Special Relay (SM) Special Register (SD) Ethernet Simple PLC communication CC-Link IEF Basic Nollställning av alla räknare Nollställning av Summavärde, idag Pulser, idag Nollställning av Summavärde, igår Pulser, igår Nollställning av total summavärde, total pulser pulser idag pulser igår pulser totalt Mängd idag Mängd igår Mängd totalt Puls insignalsvärde (mängd per puls) pulser idag pulser igår pulser totalt Mängd idag Mängd igår Mängd totalt Nollställning av alla räknare Nollställning av Summavärde, idag Pulser, idag Nollställning av Summavärde, igår Pulser, igår Nollställning av total summavärde, total pulser Today runtime (hh.mm) Yesterday runtime (hh:mm) Total runtime (hh:mm) Automatik(1) eller manuellt(0) läge Manuell startsignal (1) Manuell stoppsignal (1) Avställd(1) från drift Reset av hållkrets larm Reset av total drifttid Startfördröjning (auto-läge) Stoppfördröjning (auto-läge) Fördröjning, oppositionsfel Inval, blockering Inval, oppositionsfel Ström (A) Status (0 = Stoppad, 1 = Startas, 2 = Stoppar, 3 = I drift, 4 = driftfel) Starter, totalt Starter, idag Starter, igår Drifttid, totalt (hh.mm) Drifttid, idag (min) Drifttid, igår (min) Objekt autostartbegäran starta(1), eller stoppa (0) Objekt i drift (1), eller stopp (0) Objekt i blockerat läge (1), eller normalt (0) Objekt i autoläge (1), eller manuell (0) Objekt i fjärr (1), eller i lokalt läge (0) Objekt i lokalt läge (1), eller fjärr (0) (invertering av Remote) Objekt i drift (1), eller stopp (0) Summalarm (för visning) Återställning nödvändig Oppositionsfel Manuell alternering 0=no swap, 1=swap on stop, 2=scheduled swap 1..7 = weekday, 8 = every day 0..23 Automatik(1) eller manuellt(0) läge Manuell startsignal (1) Manuell stoppsignal (1) Avställd(1) från drift Reset av hållkrets larm Reset av total drifttid Fördröjning, oppositionsfel Inval, blockering Inval, oppositionsfel Status (0 = Stoppad, 1 = Startas, 2 = Stoppar, 3 = I drift, 4 = driftfel) Objekt autostartbegäran öppna(1) Objekt autostartbegäran stänga(1) Objekt i öppet (1) läge, eller ej öppet (0) läge Objekt i stängt (1) läge, eller ej stängtt (0) läge Objekt i mellanläge (1), eller i indikerat läge (0) Objekt i blockerat läge (1), eller normalt (0) Objekt i autoläge (1), eller manuell (0) Objekt i fjärr (1), eller i lokalt läge (0) Objekt i lokalt läge (1), eller fjärr (0) (invertering av Remote) Objekt i drift/öppnar (1), eller pausad (0) Objekt i drift/stänger (1), eller pausad (0) Summalarm (för visning) Återställning nödvändig Oppositionsfel, öppnar ej Oppositionsfel, stänger ej Oppositionsfel Positionsfel, indikerar både öppet och stängt Reset av total drifttid Styrsignal Ström Status Starter, totalt Starter, idag Starter, igår Drifttid, totalt (hh.mm) Drifttid, idag (min) Drifttid, igår (min) Objekt autostartbegäran starta(1), eller stoppa (0) Objekt i drift (1), eller stopp (0) Objekt i blockerat läge (1), eller normalt (0) Objekt i autoläge (1), eller manuell (0) Objekt i fjärr (1), eller i lokalt läge (0) Objekt i lokalt läge (1), eller fjärr (0) (invertering av Remote) Objekt i drift (1), eller stopp (0) Summalarm (för visning) Återställning nödvändig Oppositionsfel Startfördröjning (auto-läge) Stoppfördröjning (auto-läge) Fördröjning, oppositionsfel Inval, blockering Inval, oppositionsfel Börvärde Förstärkning Integreringstid Deriveringstid Max utsignal Min utsignal Typ av regulator (0) = P, (1) = PI, (2) = PID, (3) = PD Indirekt (0) eller Direkt (1) reglering Manuellt värde Objekt i manuell (0) eller auto (1) Value max Value min HH alarm limit H alarm limit L alarm limit LL alarm limit SetPoint alarm hysteris Default value Error value HH alarm delay H alarm delay L alarm delay LL alarm delay Channel enable HH alarm enable H alarm enable L alarm enable LL alarm enable Man(0) / Auto(1) selector Manual value Tempertur Aktivt börvärde Tillfällig höjning/sänkning, tid kvar Tillfällig höjning/sänkning, aktiv Aktivt läge (0=kyla, 1=värme) Begäran Aktiv Börvärde Förstärkning Integreringstid Deriveringstid Max utsignal Min utsignal HH alarm deviation limit H alarm deviation limit L alarm deviation limit LL alarm deviation limit Typ av regulator (0) = P, (1) = PI, (2) = PID, (3) = PD HH alarm delay H alarm delay L alarm delay LL alarm delay Indirekt (0) eller Direkt (1) reglering Channel enable HH alarm enable H alarm enable L alarm enable LL alarm enable Manuellt värde Objekt i manuell (0) eller auto (1)